IBM ThinkPad 770X, User Manual, Page: 197 / 229

DC
: Set the power management mode when using battery power.
Set
POwer
,
LCd
,
DISK
,
SPeed
, and
STandby
to their original values:
Note:
This command is effective on the current power
management mode set by the
PM
command.
Set the power management mode to enter when a low-battery
condition occurs:
Note:
Create the hibernation file using the
HFILE
command
before using the
LB H
command.
| Enable or disable an incoming call:
PMode High | Auto | Custom [AC | DC]
DEFAULT — —
LBattery Suspend | Hibernation —
RI Enable | Disable —
Serial Connector Commands
Set the features for the serial connector:
Set power on or off for the serial device attached to the serial
connector:
SERA Enable | Disable
ADDress —
1 | 2 | 3 | 4
SErial ON | OFf —
Appendix A. Using PS2 Commands
189