IBM ThinkPad 770X, User Manual, Page: 121 / 229

Installing Microsoft Windows 98
If you are installing Windows 98 on a drive other than the C drive,
more than 25 MB is required on the C drive.
1
Install the Windows 98 CD-ROM into the CD-ROM drive.
2
Search for SETUP.EXE in the CD-ROM, and run the
SETUP.EXE. Enter the following:
src_cd:\tgt_dir\SETUP.EXE
where
src_cd
is the drive letter of the CD-ROM drive (D, E...)
and
tgt_dir
is the directory that SETUP.EXE is in.
For more information, refer to the SETUP.TXT in the Windows
98 CD-ROM.
|
3
After Windows 98 is installed, insert the Windows 98
| Supplement File Diskette into the diskette drive.
|
4
Click on Start..
|
5
Click on Run...
|
6
Type
A:\PIXX4\APM2APM\APM2APM.REG
| and click on OK.
|
7
Follow the instructions on the screen.
|
8
After the installation has finished, remove the Windows 98
| Supplement File Diskette from the diskette drive and restart the
| computer.
Note:
Depending on the optional applications you install with
Windows 98, your required disk space varies. The following
information applies to installing only Windows 98 in your
computer:
Full install on a FAT 16 drive:
About 225 MB disk space is required. Depending on your
system configuration and the options you select, the
required space ranges from 165 MB to 355 MB.
Chapter 8. Installing Software
113