IBM ThinkPad 770X, User Manual, Page: 95 / 229

CARDINFO /OFF[:S,F]
Turns off power to all PC Card slots.
Note: S
is the parameter that specifies the
slot. You can turn off the power to only
the specified slot with this parameter.
F
is the parameter that specifies the
function. You can turn off the power to
only the specified function with this
parameter.
CARDINFO /ON[:S,F]
Turns on power to all PC Card slots.
Note:
S
is the parameter that specifies the
slot. You can turn on power to only the
specified slot with this parameter.
F
is the parameter that specifies the
function. You can turn on power to only
the specified function with this
parameter.
CARDINFO /?
Displays information about CARDINFO
switches.
Using the Configuration Utility
The Configuration utility (CONFIG.EXE) modifies the CARDID.INI
and CSALLOC.INI files. You need to run this utility if you are having
difficulty using the PC Card, or if you are customizing your system.
Whenever you finish using this utility, restart your system so that
your changes take effect.
The Configuration utility can be used for the following purposes:
Setting or changing the IRQs and COM port assignment order for
your fax/modem cards.
Setting or changing the I/O port address, IRQ, and memory
areas that your network cards will use.
Selecting the address (primary, secondary, or any) that your ATA
cards will be using to communicate with the system.
Selecting the type of video display (color, monochrome, or LCD).
Chapter 5. Using Your Computer with a PC Card
87