IBM ThinkPad 770X, User Manual, Page: 152 / 229

4
Click on OK.
5
Restart the computer to make the new settings effective.
Next, add
ThinkPad Modem
in the Control Panel so that you can use
communication applications that use the Unimodem facility of
Windows NT, such as HyperTerminal or Dial-Up Networking:
1
In Windows NT, click on Start, select Settings; and then select
Control Panel.
2
Double-click on the Modems icon.
3
Do the following:
If you do not already have a modem installed, you
immediately see the “Install New Modem” window.
If you already have a modem installed, click on Add to
open the “Install New Modem” window.
4
Click on Next.
Windows NT searches for the modem.
If successful, Windows NT reports that it has found a modem of
type “ThinkPad Data Fax Modem.” If Windows NT fails to
detect a modem, verify that your communication port was
configured. Remember that the changes you make do not take
effect until you restart Windows NT.
5
Click on Next and follow the instructions on the screen.
You can now use your ThinkPad Modem with all the modem
communication applications supported by Windows NT.
Installing the IDE Driver for Windows NT
Install the ThinkPad PIIX4 IDE driver as follows:
1
Start Windows NT and log on with the user ID authorized as an
administrator.
2
Insert the IDE Driver Diskette into the diskette drive.
3
Click on Start.
144
IBM ThinkPad 770X Online Book