IBM ThinkPad 570 Page 130 User Manual Download

Page: 130 / 166

Command

Function

\Q1

Enables XON/XOFF flow control (same as
&K4).

\Q3

Enables RTS/CTS flow control (same as &K3).
(default)

\V0

Disables the protocol result code appended to
DCE speed.

\V1

Enables the protocol result code appended to
DCE speed. (default)

Modem response codes

The following table lists the basic codes that the modem sends to
your computer in response to the commands you type. They are
called response codes.

Digital
code

Word code

Meaning

The command was run without error.

Connect

The modem was connected at 300 bits
per second (bps).

Ring

A ringing signal is detected.

No carrier

The carrier is lost or not heard.

Error

Error in the command line.
Invalid command.
Command line exceeds buffer.
Invalid character format.

Connect
1200EC*

The modem was connected at 1200
bps.

No dial tone

There was no dial tone during the
timeout period.

Busy

The line being called is busy.

124

IBM ThinkPad 570 Online Book

Summary of Contents for ThinkPad 570







































































































































































Search results

Summary of Contents for ThinkPad 570

Reviews:

Related manuals for ThinkPad 570

Brands by name

Popular brands

IBM ThinkPad 570, User Manual

Search results

Summary of Contents for ThinkPad 570

Reviews:

Related manuals for ThinkPad 570

Brands by name

Popular brands