IBM ThinkPad 570 Page 16 User Manual Download

Page: 16 / 166

computer does not have a volume control knob, however, you can
control volume by pressing the PgUp (

) or PgDn (

) key.

For more information about your computer

User's Reference.

Note:

The value you set with the volume control knob or the Fn

PgUp or PgDn key combination is the maximum or minimum
value of the volume.

Setting the volumes with device drivers

The volume is also controlled by each device, and you can set it for
each device.

Double-click the small speaker icon (

) at the bottom right of the

Windows desktop.

Click Start; move the cursor to Program, Accessories,
Entertainment; and click Volume Control.

A “Master” window similar to the following appears:

After you make any changes, exit the “Master” window.

Note:

Dock In and ZV Port are set to mute by default. To use these

functions, clear check boxes.

IBM ThinkPad 570 Online Book

Summary of Contents for ThinkPad 570







































































































































































Search results

Summary of Contents for ThinkPad 570

Reviews:

Related manuals for ThinkPad 570

Brands by name

Popular brands

IBM ThinkPad 570, User Manual

Search results

Summary of Contents for ThinkPad 570

Reviews:

Related manuals for ThinkPad 570

Brands by name

Popular brands