Command
Function
A/
Repeats the preceding command.
Note:
Do not precede with
AT
or follow with
Enter.
B0
Specifies ITU/CCITT mode @ 1200 bps.
B1
Specifies bell mode @ 1200 bps. (default)
B15
Specifies ITU/CCITT mode @ 300 bps.
B16
Specifies bell mode @ 300 bps. (default)
D
sn
Dials a telephone number
n (n=0–9, A–D, #,
and *) automatically. You can also assign the
following:
s = L
Redials the last number dialed
s = P
Specifies pulse dial
s = T
Specifies tone dial (default)
s = W
Waits for a second dial tone
s = V
Switches to speakerphone mode
s = ,
Specifies pause
s = @
Waits for 5 seconds of silence
s = !
Specifies flash
s = ;
Returns to command mode
after dialing
DS=
n
Dials one of four stored telephone numbers
(
n=0–3) in the modem's nonvolatile memory.
E0
Disables command echo.
E1
Enables command echo. (default)
+++
Switches escape characters from data mode to
command mode.
H0
Hangs up (modem on-hook). (default)
H1
Makes busy signal (modem off-hook).
I0
Specifies firmware and device ID.
I1
Specifies checksum code.
120
IBM ThinkPad 570 Online Book
Summary of Contents for ThinkPad 570
