IBM System x3550 M3, Installation And User Manual

Page: 65 / 160

The following illustration shows the internal routing and connector for the operator
information panel cable. The following notes describe additional information you
must consider when you install or remove the operator information panel cable:
v You may remove the optional optical drive cable to obtain more room before you
install or remove the operator information panel cable.
v
To remove the operator information panel cable, slightly press the cable toward
the chassis; then, pull to remove the cable from the connector on the system
board. Pulling the cable out of the connector by excessive force might cause
damage to the cable or connector.
v
To connect the operator information panel cable on the system board, press
evenly on the cable. Pressing on one side of the cable might cause damage to
the cable or connector.
The following illustration shows the internal routing and connector for the USB/video
cable. The following notes describes other information you must consider when you
install or remove the USB/video cable:
v
You may remove the optional optical drive cable to obtain more room before you
install or remove the operator information panel cable.
v
The USB/video cable is routed under the video cable and then both the USB and
video cables are routed under the cable retention tab and the top cover latch
receptacle.
v To remove the USB/video cable, slightly press the cable toward the chassis;
then, pull to remove the cable from the connector on the system board. Pulling
the cable out of the connector by excessive force might cause damage to the
cable or connector.
v
To connect the USB/video cable on the system board, press evenly on the cable.
Pressing on one side of the cable might cause damage to the cable or connector.
Chapter 2. Installing optional devices
49