IBM System x3550 M3 Installation And User Manual Download Page 140

Page: 140 / 160

b. If a newer version of IBM Systems Director than what comes with the server

is shown in the drop-down list, follow the instructions on the Web page to
download the latest version.

2. Install the IBM Systems Director program.

If your management server is connected to the Internet, to locate and install
updates and interim fixes, complete the following steps:

1. Make sure that you have run the Discovery and Inventory collection tasks.

2. On the Welcome page of the IBM Systems Director Web interface, click

View

updates

3. Click

Check for updates

. The available updates are displayed in a table.

4. Select the updates that you want to install, and click

Install

to start the

installation wizard.

If your management server is not connected to the Internet, to locate and install
updates and interim fixes, complete the following steps:

1. Make sure that you have run the Discovery and Inventory collection tasks.

2. On a system that is connected to the Internet, go to http://www.ibm.com/

eserver/support/fixes/fixcentral/.

3. From the

Product family

list, select

IBM Systems Director

4. From the

Product

list, select

IBM Systems Director

5. From the

Installed version

list, select the latest version, and click

Continue

6. Download the available updates.

7. Copy the downloaded files to the management server.

8. On the management server, on the Welcome page of the IBM Systems

Director Web interface, click the

Manage

tab, and click

Update Manager

9. Click

Import updates

and specify the location of the downloaded files that you

copied to the management server.

10. Return to the Welcome page of the Web interface, and click

View updates

11. Select the updates that you want to install, and click

Install

to start the

installation wizard.

The Update

Xpress

System Pack Installer

The Update

Xpress

System Pack Installer detects supported and installed device

drivers and firmware in the server and installs available updates. For additional
information and to download the Update

Xpress

System Pack Installer, go to the

System x and BladeCenter Tools Center at http://publib.boulder.ibm.com/infocenter/
toolsctr/v1r0/index.jsp and click

UpdateXpress System Pack Installer

124

IBM System x3550 M3 Types 4254 and 7944: Installation and User’s Guide

Summary of Contents for System x3550 M3

































































































































































Search results

Summary of Contents for System x3550 M3

Reviews:

Related manuals for System x3550 M3

Brands by name

Popular brands

IBM System x3550 M3, Installation And User Manual

Search results

Summary of Contents for System x3550 M3

Reviews:

Related manuals for System x3550 M3

Brands by name

Popular brands