IBM System x3550 M3, Installation And User Manual

Page: 103 / 160

Microprocessor
cover release
tabs
Microprocessor
cover
Installation tool
Microprocessor
f. Carefully align the microprocessor installation tool over the microprocessor
socket.
Attention: The microprocessor fits only one way on the socket. You must
place a microprocessor straight down on the socket to avoid damaging the
pins on the socket. The pins on the socket are fragile. Any damage to the
pins may require replacing the system board.
Installation tool
Alignment pins
Microprocessor
g. Twist the handle on the microprocessor tool counterclockwise to insert the
microprocessor into the socket.
Installation tool
Handle
h. Close the microprocessor bracket frame.
i. Carefully close the microprocessor release lever to the closed position to
secure the microprocessor in the socket.
7. Install the heat sink:
a. Remove the plastic protective cover from the bottom of the heat sink.
b. Align the heat sink on top of the microprocessor with the thermal grease
side down.
Chapter 2. Installing optional devices
87