IBM System Storage, Administrator'S Manual

Page: 46 / 94

6–6
Administrator’s Guide
in step 5, you see PASSWORD INCORRECT on the first line of the
display panel. Press the Enter push button. You see TRY AGAIN on the
first line of the display panel. Press the Enter push button and repeat step
5 through step 7.
The new password is effective until you change it again.
Choosing a Menu Setting
To choose a menu setting, do one of the following steps:
1. Choose from the settings you see on the display panel. An example is
when you use the Menu Scrolling push buttons to show you Yes or No,
and then you press the Enter push button to choose the setting that you
see on the display panel.
2. Enter a setting one character at a time (such as a password or printer
name).
a. Use the Menu Scrolling push buttons to choose the first alphanumeric
character you want on the second line of the display panel. You can
use capital letters, small letters, and numerals.
b. Use the right Cursor Position push button to advance the cursor to the
next character position.
If you need to correct a character in a previous character position, use
the left Cursor Position push button to move the cursor to the position
you want to correct.
c. Repeat steps a and b for each character you want.
d. When you finish, press the Enter push button.
The current setting for a menu item has an asterisk displayed to the left of the
setting.
When you are in the Setup menus, the Menu push button gives you a
shortcut out of the menu you are working in. After you have made the
changes you want in a particular Setup menu, pressing the Menu push
button allows you to exit that Setup menu without viewing the remaining
choices in that menu.
Printing the Help Map
It may be helpful to print the Help Map and use it as a guide for navigating
the menus. The Help Map tells you about the operator panel, push buttons,
and panel lights and lists all the menus. Refer to the
Operator’s Guide for
instructions on how to print this map.