IBM Storwize V7000, Troubleshooting And Maintenance Manual

Page: 59 / 188

Create cluster command
Use this command to create a storage system.
Syntax
satask mkcluster -clusterip ipv4
-gw ipv4 -mask ipv4 -name cluster_name
satask mkcluster -clusterip_6 ipv6
-gw_6 ipv6 -prefix_6 int -name cluster_name
Parameters
-clusterip
(Optional) The IPv4 address for Ethernet port 1 on the system.
-gw
(Optional) The IPv4 gateway for Ethernet port 1 on the system.
-mask
(Optional) The IPv4 subnet for Ethernet port 1 on the system.
-clusterip_6
(Optional) The IPv6 address for Ethernet port 1 on the system.
-gw_6
(Optional) The IPv6 gateway for Ethernet port 1 on the system.
-prefix_6
(Optional) The IPv6 prefix for Ethernet port 1 on the system.
-name
(Optional) The name of the new system.
Description
This command creates a storage system.
This command calls the satask mkcluster command.
Query status command
Use this command to determine the current service state of the node canister.
Syntax
sainfo getstatus
Parameters
None.
Description
This command writes the output from each node canister to the USB flash drive.
This command calls the
sainfo lsservicenodes
command, the
sainfo
lsservicestatus
command, and the
sainfo lsservicerecommendation
command.
Chapter 5. Storwize V7000 user interfaces for servicing your system
41