IBM Storwize V7000, Introduction And Implementation Manual

Page: 404 / 670

384
IBM Flex System V7000 Storage Node Introduction and Implementation Guide
It is the same with backup preset, and the default settings of backup preset are found
when you click Advanced Settings, after you select the backup preset (Figure 9-18),
which includes:
• Background Copy: 50
• Incremental: Yes
• Auto Delete after completion: No
• Cleaning Rate: 50
Figure 9-18 Default settings for the backup preset
Change the settings of the FlashCopy mapping according to your requirements and
click Next.
b. In the next step, you could add your FlashCopy mapping to a consistency group
(Figure 9-19). If the consistency group is not ready, the FlashCopy mapping can be
added to the consistency group afterward. Click Next to continue.
Figure 9-19 Add FlashCopy mapping to a consistency group
c. You can choose from which storage pool you want to create your volume. As shown in
Figure 9-20, you can select the same storage pool that is used by the source volume.
Click Next to continue.