1. Locate the expansion enclosure rails (Figure 74 on page 64).
The rail assembly consists of two rails that must be installed in the rack cabinet.
Figure 74. Expansion enclosure support rails
2. Locate the hardware that is used to install the rails, including two rail springs, two sets of eight
bracket pins, and two M5 screws.
Set the hardware aside for use later in the installation process.
3. Install a spring on each rail.
a) Extend the rail to its full length.
b) Push one looped end of a spring over one stud on the inside of the rail. (See Figure 75 on page
65.)
c) Stretch the spring slightly and push the other looped end of the spring onto the other stud on the
inside of the rail.
64 Storwize V5100 : Quick Installation Guide for MTM 2078-424, 2078-12F, 2078-24F, 2078-92F, and 2078-
U5B
Summary of Contents for Storwize V5100 Series
Page 129: ......
