IBM SAN768B-2, User Manual

Page: 50 / 228

Remove the cable management comb (see “Removing and installing a cable
management comb” on page 82), and set the parts aside for later reinstallation.
Using the lift tool, the 24–inch load plate, and the bridge tool
Steps 1 through 9 describe how to use the lift tool (PN 09P2481) and the 24–inch
load plate (PN 11P4369) to install a SAN768B-2 in the cabinet. Steps 10 through 23
describe how to install the bridge tool (PN 18P5855) in the cabinet for the lower
SAN768B-2 or the upper SAN768B-2. This procedure uses parts from the 14U
chassis mount kit. See “Rack mount kit parts list” on page 18 for a list of these
parts.
svc00169
55 kg ( 121.2 lbs)
CAUTION:
A fully populated SAN768B-2 weighs approximately 159.2 kg (351 lb)
and requires a minimum of two people and a lift tool to install it.
(C011)
Attention: Before you install the chassis, verify that the additional weight of the
chassis does not exceed the cabinet's weight limits or unbalance the cabinet. When
you calculate the additional weight, include the cards or power supplies that
partially extend out of the chassis.
b768ig063
Figure 6. Chassis door removal
22
SAN768B-2 Installation, Service, and User Guide