IBM Remote Supervisor Adapter II, Installation Manual

Page: 37 / 84

Completing the installation
Complete the following steps to finish the installation of the Remote
Supervisor Adapter II:
1. If you plan to configure Simple Network Management Protocol (SNMP)
traps on the Remote Supervisor Adapter II, you must install and compile
the management information bases (MIBs) on your SNMP manager. One
MIB supports SNMP traps and the other MIB supports the Get, GetNext,
and Set request and response operations. The MIBs are packaged with the
Remote Supervisor Adapter II firmware update. For information about how
to download the Remote Supervisor Adapter II firmware update, see
“Obtaining Remote Supervisor Adapter II software and firmware” on page
22.
2. If you did not restart the server after installing the Remote Supervisor
Adapter II device drivers, restart the server now.
3.
See the IBM Remote Supervisor Adapter II User’s Guide for detailed
instructions for completing the configuration of the Remote Supervisor
Adapter II, including the following features:
v
Controlling the server remotely
v
Defining the login IDs and passwords
v
Monitoring remote server status using the Remote Supervisor Adapter II
Web interface
v
Using Remote Disk to enable the attachment of a diskette drive,
CD-ROM drive, or disk image to a server
v
Selecting the events that will receive alert notification
v
Setting up the secure Web server
v
Using a secure connection to a Lightweight Directory Access Protocol
(LDAP) server for user authentication
If you want to set up an ASM interconnect network and have not already done
so, go to Chapter 3, “Using the ASM interconnect network,” on page 27. If you
do not want to set up an ASM interconnect network, your installation is now
completed.
Chapter 2. Installing and cabling the Remote Supervisor Adapter II
25