manualshive.com logo in svg

IBM RELEASE 7.3, Management Manual


Share
Download
background image

Servers that do not support reinitialization, or those that do not support reinitializing the settings in 
question, must be restarted in order for configuration modifications to take affect.

Some groups of servers depend on consistent configuration information to run properly.  For example, 
the Core Server and Migration/Purge Server must agree on Class of Service, Hierarchy and Storage Class 
configurations.  When changes are made to these sorts of configuration information, all of the servers 
that rely on these settings should be restarted to make sure they agree.

5.1.  Forcing an SSM Connection

When the status of the server’s connection with SSM is UP/UNCONNECTED, select the server and then 
click on the 

Force Connect

 button on the 

Servers

 window. SSM will attempt to establish the connection 

with the server and reflect the latest data in the 

Status

 field on the 

Servers

 window.

The SSM System Manager periodically retries the connection with all the servers that are configured to 
execute. The 

Force Connect

 button may be used to trigger an immediate connection request.

HPSS Management Guide

November 2009

Release 7.3 (Revision 1.0)

156

Summary of Contents for RELEASE 7.3





































































































































































































































































































































































































Reviews:

No comments

Related manuals for RELEASE 7.3

Samsung SCX 4500 - B/W Laser - All-in-One Manual preview
SCX 4500 - B/W Laser - All-in-One
Brand: Samsung Pages: 21
Samsung SCX 4828FN - Laser Multi-Function Printer Manual preview
SCX 4828FN - Laser Multi-Function Printer
Brand: Samsung Pages: 38
Samsung SCX 4725FN - B/W Laser - All-in-One Manual preview
SCX 4725FN - B/W Laser - All-in-One
Brand: Samsung Pages: 33
Halcro RS232 Specification preview
RS232
Brand: Halcro Pages: 12
Olympus E-20 - Dual Monaural Earphones Software Installation Manual preview
E-20 - Dual Monaural Earphones
Brand: Olympus Pages: 2
Alcatel-Lucent AUTOMATED MESSAGE DELIVERY SYSTEM 5.0 Quick Start Manual preview
AUTOMATED MESSAGE DELIVERY SYSTEM 5.0
Brand: Alcatel-Lucent Pages: 4
Philips SpeechExec Dictation Recorder 1.6.0.0 User Manual preview
SpeechExec Dictation Recorder 1.6.0.0
Brand: Philips Pages: 42
Philips RWDV1610B/00 User Manual preview
RWDV1610B/00
Brand: Philips Pages: 56
Philips SPEECHEXEC 4.3 Quick Reference Manual preview
SPEECHEXEC 4.3
Brand: Philips Pages: 184
Intel Rapid Storage Technology User Manual preview
Rapid Storage Technology
Brand: Intel Pages: 19
FieldServer FS-8700-70 Driver Manual preview
FS-8700-70
Brand: FieldServer Pages: 14
Xerox 850DP - Phaser Color Solid Ink Printer Release Note preview
850DP - Phaser Color Solid Ink Printer
Brand: Xerox Pages: 33
Datavideo PPT-100 User Manual preview
PPT-100
Brand: Datavideo Pages: 15
Canon Pull Print Service Provider Version 1.0... User Manual preview
Pull Print Service Provider Version 1.0...
Brand: Canon Pages: 54
MACROMEDIA FLASH 8-GETTING STARTED WITH FLASH Getting Started preview
FLASH 8-GETTING STARTED WITH FLASH
Brand: MACROMEDIA Pages: 152
Watchguard Firebox V10 End User Manual preview
Firebox V10
Brand: Watchguard Pages: 8
AVG AVG 8.5 FILE SERVER EDITION User Manual preview
AVG 8.5 FILE SERVER EDITION
Brand: AVG Pages: 133
Adaptec 1684800 - EZ-SCSI Deluxe User Manual preview
1684800 - EZ-SCSI Deluxe
Brand: Adaptec Pages: 9

Brands by name

Popular brands

Load more brands