IBM RELEASE 7.3, Management Manual

Page: 269 / 388

•
Port - The location is a port number. [This option is currently not used.]
•
Drive - The location is a drive ID number.
•
Slot - The location is a slot specification.
The following fields are filled in (non-zero) based on the Location Type and whether or not the PVR has
the information:
Port . The port number where the cartridge is located. This option is currently not used and thus
will always be zero.
Drive ID . The drive ID number where the cartridge is located. This field is valid when the
Location Type is Drive. It is used/valid when the cartridge is Mounted; it is not used/valid (and
thus will have the value of zero) when the cartridge is not Mounted. The SCSI PVR also uses this
field to support the
Enforce Home Location feature.
Slot . The slot address ( Unit , Panel , Row and Column ) for the cartridge. These fields are valid
only if Location Type is Slot and the PVR supports this (STK and AML). The fields will be zero
when it's not valid.
Buttons
Cancel Mount . When Mount Status is displaying Mount Pending, the Cancel Mount button to the right
of the field will be sensitized. If you click the button, a large warning will be displayed, and you will
have to confirm your request by clicking
Cancel Mount again. This will send a request to the PVR to
cancel the mount request for the cartridge. As noted in the on-screen warning, this should only be done as
a last-ditch attempt to cancel a mount request which cannot be canceled in any other way.
Note that this will not dismount a mounted tape.
8.5.4. Core Server Volume and Segment Windows
8.5.4.1. Core Server Disk Volume Information Window
HPSS Management Guide November 2009
Release 7.3 (Revision 1.0) 269