IBM Power System 8001-12C, Manual

Page: 42 / 130

The sensor ID field contains sensor information in the format sensor name (sensor ID). Record the
sensor name, sensor ID, and event description. Then, use this information to determine the service
action to perform:
v If your system is an 8001-12C or 8005-12N, go to “Identifying a service action by using sensor and
event information for the 8001-12C and 8005-12N” on page 27. This ends the procedure.
v If your system is an 8001-22C or 8005-22N, go to “Identifying a service action by using sensor and
event information for the 8001-22C and 8005-22N” on page 43. This ends the procedure.
This ends the procedure.
Identifying service action keywords in system event logs
System event logs (SELs) that have Asserted and any of the keywords indicated below in the description
require a service action.
Temperature and voltage service action keywords
v Transition to Critical from Less Severe
v Transition to Critical from Non-recoverable
v Transition to Non-recoverable
v Transition to Non-recoverable from Less Severe
Backplane service action keywords
v State Asserted
Chassis service action keywords
v
General Chassis intrusion
Fan service action keywords
v Transition to Critical from Less Severe
v Transition to Non-recoverable from Less Severe
v Transition to Critical from Non-recoverable
v Device Removed / Device Absent
v Transition to degraded
v Install error
v Redundancy lost
v Non-redundant insufficient resources
Memory service action keywords
v Configuration Error
v Transition to Non-recoverable
v Predictive Failure
Processor service action keywords
v IERR
v Transition to Non-recoverable
v Predictive Failure
v Device Disabled
Power supply service action keywords
v Power Supply Failure Detected
v Predictive Failure
26
Problem analysis, system parts, and locations for the 8001-12C, 8001-22C, 8005-12N, and 8005-22N