IBM Power 750 Express 8408-E8D, Manual

Page: 54 / 66

v
Use the shortest-length cable available for each point-to-point connection.
v
If cables have to be routed across the rear of a drawer, leave enough slack to reduce the tension on the
cables for maintenance of the drawer.
v
When routing cables, leave enough slack around the power connection on the power distribution unit
(PDU) so that the wall-to-PDU line cord can be attached to the PDU.
v
Use hook-and-loop fasteners where necessary.
Related information :
POWER7 770/780 Cabling guide
Figure 24. Cable management bridge lances
Figure 25. Cable bend radius
42
Power Systems: Installing the IBM Power 750 (8408-E8D) and IBM PowerLinux 7R4 (8248-L4T)