IBM PC 300PL Types 6862, User Manual

Page: 67 / 190

2. Turn on the computer. If it is on already, you must turn it off and
back on again.
3. The update begins, your computer halts, and you are prompted for
your administrator password (if you have set an administrator
password). The computer remains in a halted state until you enter the
administrator password.
4. When you enter the administrator password, or if no administrator
password has been set, the update diskette will continue to run, and
you are given the option of enabling or disabling Enhanced Security.
Your choice is automatically recorded in the System Security menu of
the Configuration/Setup Utility program.
Enabling the Pentium III processor serial number
feature
Some models come with a Pentium III microprocessor that features a
processor serial number. The processor serial number is an electronic
number unique to every Pentium III microprocessor. This feature is used
primarily to enhance security with Internet transactions. Models equipped
with the Pentium III microprocessor are shipped to you with this feature OFF
(disabled).
To enable this feature, use the following procedure:
1. Start the Configuration/Setup Utility program.
2. Select Advanced Setup and press Enter.
3. Select Processor Control and press Enter.
4. Change the value for Processor Serial Number Access from Disabled
to Enabled and press Enter.
5. Save the settings, exit the program and restart your computer with the
computer power switch to activate the new setting.
Other settings in the Configuration/Setup Utility
program
The information in this section includes instructions for changing other
settings in the Configuration/Setup Utility, such as the keyboard speed, the
startup sequence, remote administration, and power management.
Chapter 4. Configuration/Setup Utility program
49