IBM PC 300PL Types 6862, User Manual

Page: 113 / 190

and from which it cannot be removed; then fasten the cable ends
together with a lock.
Completing the installation
After working with options, you need to reinstall any removed parts,
replace the cover, and reconnect any cables, including power cords and
telephone lines. Also, depending on the option installed, you might need to
update information in the Configuration/Setup Utility program.
The following list is a quick reference to these procedures:
Ÿ
“Replacing the cover and connecting the cables”
Ÿ
“Updating the computer configuration” on page 97
Replacing the cover and connecting the cables
To replace the cover and connect cables to your computer:
1. Ensure that all components have been reassembled correctly and that
no tools or loose screws are left inside your computer.
2. Clear any cables that might impede the replacement of the cover.
3. Position the cover over the chassis as shown and slide forward. You
might need to lift the front of the cover slightly to align it properly.
4. Insert the three thumbscrews into the holes in the cover and the chassis
and tighten.
5. If the computer has a cover lock, then use the key to lock it.
6. Reconnect the external cables and cords to the computer. See “Desktop
model connections” on page 12 or “Tower model connections” on
page 13.
Chapter 5. Installing options
95