IBM PC 300PL Types 6862, User Manual

Page: 100 / 190

To install an adapter:
1. Move the power supply aside if necessary. See “Moving the power
supply — tower model” on page 71.
2. Remove the screw and slot cover for the appropriate expansion slot.
3. Remove the adapter from its static-protective package.
4. Install the adapter into the appropriate slot on the system board.
5. Install the screw that secures the adapter.
Note: If you are installing a Wake on LAN supported network
adapter, attach the Wake on LAN cable that comes with the
adapter to the Wake on LAN connector on the system board.
(This might not be necessary with all computers.) If you also
want to take advantage of the Alert on LAN feature of your
computer, you must install your network adapter in PCI slot 3.
For the location of PCI slot 3 and the Wake on LAN connector,
see the diagram of the system board on the inside of your
computer.
6. If you moved the power supply aside, replace it. See “Moving the
power supply — tower model” on page 71.
7. Replace the cover.
82
PC 300PL and PC 300GL User Guide