IBM PC 300PL Type 6584, User Manual

Page: 36 / 194

No IP address found for DHCP or BOOTP
The operating system and application programs are loaded from
the hard disk drive.
Ÿ
If you have not plugged an Ethernet cable into the Ethernet
connection on your computer, the following message appears:
Media test failed; check cable
and the operating system and application programs are loaded
from the hard disk drive.
What you see and hear when you start up your computer depends on the
settings in the Start Options menu of the Configuration/Setup Utility
program. The default settings are Power On Status [Disabled] and Power
On Self Test
[Quick].
Notes:
1. Other selections also might change what is displayed when the
computer starts up.
2. If you have preinstalled software, a preinstalled application called
ConfigSafe automatically takes a snapshot of your initial system
settings when you first start up your computer. With this information,
you can reset these settings if a configuration update fails in the future.
For further information about ConfigSafe and other software provided
with your computer, see About Your Software.
Your computer can "wake up" and be started remotely over a network if it
has a properly configured network connection to a network adapter with
Wake on LAN support. For more information, see “Wake on LAN” on
page 28 and “Setting the startup sequence” on page 48.
Shutting down
When you are ready to turn off your computer, follow the shutdown
procedure for your operating system to prevent the loss of unsaved data or
damage to your software programs. See your operating system
documentation for instructions.
22
PC 300PL User Guide