IBM PC 300PL Type 6584 User Manual Download

Page: 74 / 194

Do not place the option on the computer cover or other metal surface.

Available options

The following are some available options:

Adapters

– Peripheral component interconnect (PCI) adapters
– Industry standard architecture (ISA) adapters (some models)

Internal drives

– CD-ROM
– Hard disk

– Diskette drives and other removable media drives.

System memory, called Rambus in-line memory modules (RIMMs)

For the latest information about available options, see the following World
Wide Web pages:

http://www.ibm.com/pc/us/options/

http://www.ibm.com/pc/support/

You can also obtain information by calling the following telephone
numbers:

Within the United States, call 1-800-IBM-2YOU (1-800-426-2968), your
IBM reseller, or IBM marketing representative.

Within Canada, call 1-800-565-3344 or 1-800-465-7999.

Outside the United States and Canada, contact your IBM reseller or
IBM marketing representative.

Tools required

To install or remove some options in your computer, you will need a
flat-blade screwdriver. Additional tools might be needed for certain
options. See the instructions that come with the option.

PC 300PL User Guide

Summary of Contents for PC 300PL Type 6584



































































































































































































Search results

Summary of Contents for PC 300PL Type 6584

Reviews:

Related manuals for PC 300PL Type 6584

Brands by name

Popular brands

IBM PC 300PL Type 6584, User Manual

Search results

Summary of Contents for PC 300PL Type 6584

Reviews:

Related manuals for PC 300PL Type 6584

Brands by name

Popular brands