Installing a memory module or continuity RIMM
Before you begin
Read the instructions that come with the new system memory.
Turn off the computer and all other connected devices.
Disconnect all cables attached to the computer and remove the
computer cover (see “Removing the cover” on page 61 or
“Removing the cover” on page 77).
To install a RIMM or continuity RIMM:
1. To locate the memory connectors inside your computer, see
“Identifying parts on the system board” on page 64 (desktop) or
“Identifying parts on the system board” on page 78 (tower).
2. Remove the continuity RIMM occupying the RIMM connector. See
“Removing a memory module or continuity RIMM” on page 98 for
instructions on removing a continuity RIMM. Do not discard or lose
the continuity RIMM. It might be needed later if you change your
memory configuration.
3. Touch the static-protective package containing the memory module to
any unpainted metal surface in the computer, and then remove the
module.
4. Position the module above the connector so that the two notches on the
bottom edge of the module align properly with the connector.
Chapter 5. Installing options
99
Summary of Contents for PC 300PL Type 6584
