What to do next
Go to the device-record form in Using Your Personal Computer and record the
new installation.
To install a drive in bay 3, go to “Installing a Drive in Bay 3.”
To work with another option, go to the appropriate section.
To complete the installation, go to Chapter 7, “Completing the Installation”
on page 62.
Installing a Drive in Bay 3
1
Disconnect the signal and power cables attached to the drive in bay 3.
2
Remove the bracket that houses bay 3 by removing the screw at the front and
sliding the bracket forward and away from the computer.
Diskette
Drive
Screw
3
Remove the drive by removing the screws and then lifting the drive away
from the bracket.
Chapter 5. Working with Internal Drives
45
