IBM PC 300GL Type 6591, Installation Manual

Page: 65 / 108

3
Insert the drive into the desired unoccupied drive bay. Insert and tighten the
screws that hold it in place. The following illustration shows a CD-ROM
drive being installed in bay 1.
4
Insert the drive cage and slide it to the right until it docks against the front of
the computer; be sure the screwholes in the drive cage and support bracket
are aligned.
5
Insert and tighten the screw anchoring the drive cage at the side; then the
screw on top near the handle.
Socket
7
Socket
7
Socket
7
Socket
7
Chapter 5. Working with Internal Drives
51