IBM PC 300GL Type 6591, Installation Manual

Page: 46 / 108

2
Remove the adapter and insert it into a static-protective package.
You might have to remove the system board and the fan in order to slide the
adapter out of the slot. Refer to “Removing and Replacing the Fan” on
page 40 and “Removing and Replacing the System Board” on page 33.
3
If you are not installing another adapter in this slot, install an expansion-slot
cover and screw.
Expansion-Slot
Cover
4
If you removed the bottom cover, the fan, or the system board, replace them.
See “Removing and Replacing the Fan” on page 40, “Removing and Replacing
the System Board” on page 33, and “Removing and Replacing the Bottom
Cover” on page 38.
5
Go to the device-record form in Using Your Personal Computer and delete the
name of the adapter you removed.
Note:
Removing an adapter frees up system resources. If you remove an ISA
legacy adapter, you must use the Configuration/Setup Utility program to set
the previously used resources to [Available]. For more information, see
Chapter 7, “Completing the Installation” on page 74.
What to do next
Ÿ
To work with another option, go to the appropriate section.
Ÿ
To complete the installation, go to Chapter 7, “Completing the Installation”
on page 74.
32
Installing Options in Your Personal Computer