IBM PC 300GL Type 6591, Installation Manual

Page: 44 / 108

4
Install the adapter into the appropriate slot on the riser card and insert the
holding screw.
You might have to remove the system board and the fan in order to slide the
adapter into the slot. Refer to “Removing and Replacing the Fan” on page 40
and “Removing and Replacing the System Board” on page 33.
The components of a PCI adapter face down toward the system board and the
components of an ISA adapter face up. If a component in the computer or on
the adapter interferes with the installation, use another slot.
Adapter Card
Riser Card
5
If you removed the bottom cover, the fan, or the system board, replace them.
See “Removing and Replacing the Fan” on page 40, “Removing and Replacing
the System Board” on page 33, and “Removing and Replacing the Bottom
Cover” on page 38.
6
Go to the device-record form in Using Your Personal Computer, and write the
adapter name next to the slot into which you installed it.
What to do next
Ÿ
To work with another option, go to the appropriate section.
Ÿ
To complete the installation, go to Chapter 7, “Completing the Installation”
on page 74.
30
Installing Options in Your Personal Computer