IBM PC 300GL Type 6591, Installation Manual

Page: 36 / 108

8
Pull outward on the retainer tabs.
9
When you replace the microprocessor with one of a different speed, you must
change the microprocessor speed setting by using the Configuration/Setup
Utility program. Do not select a speed setting that is faster than the speed the
microprocessor is designed for. Unpredictable results or hardware damage
might occur. See “Updating the Computer Configuration” on page 77 and
“Setting the Microprocessor Speed” on page 84.
Note: If a 167 POST error occurs when you start your computer, refer to
Updating the System BIOS in Using Your Personal Computer and perform
a flash update of the system programs.
What to do next
Ÿ
To work with another option, go to the appropriate section.
Ÿ
To complete the installation, go to Chapter 7, “Completing the Installation”
on page 74.
22
Installing Options in Your Personal Computer