PAGE 1 OF 3
0721 IH-8259
1-800-295-5510
uline.com
COLLABORATION TABLE –
STANDING HEIGHT
WORKSTATION
H-8259
NOTE: Assemble on smooth, non-marring
surface to avoid scratching.
NOTE: Use Allen wrench to tighten bolts.
IMPORTANT! Check that all parts are included.
1. Fit support rail over corresponding bracket on leg.
Use four M6 x 12 mm bolts (D) to secure each side of
support rail. Repeat for remaining support rails.
(See Figure 1)
NOTE: Do not fully tighten bolts until assembly
is complete.
2. With second person, place tabletop on assembled
frame. Align tabletop with holes on legs. (See Figure 2)
3. Attach tabletop to legs using three
M6 x 45 mm bolts (A) per leg. (See Figure 2)
4. Attach tabletop to leg brackets using three
M6 x 15 mm bolts (B) per bracket. (See Figure 2)
5. Attach tabletop to support rails using three
M6 x 60 mm bolts (C) per rail. (See Figure 2)
6. Tighten bolts (D) installed in step 1.
PARTS
ASSEMBLY
Bolt x 6
M6 x 45 mm
A
Bolt x 12
M6 x 15 mm
B
Bolt x 9
M6 x 60 mm
C
Bolt x 24
M6 x 12 mm
D
TOOL INCLUDED
Allen Wrench
Two Person Assembly
Recommended
Para Español, vea página 2.
Pour le français, consulter les page 3.
Figure 1
Support Rail
Leg
D
Figure 2
Tabletop
A
C
B
