Chapter 2. Installing the expansion unit
17
8. Tighten the rear screws
2
.
9. Verify that option switches 1 and 2 (inside the switch card) are set to Off. See
“Setting the interface options and ID settings” on page 11 for more information.
10. Install hard disk drives and power supplies in the EXP300 expansion unit
according to “Chapter 3. Installing and replacing devices,” on page 25; then,
return here to complete the installation.
11. Continue with “Completing the installation” on page 19.
Installing the expansion unit in a NetBAY enclosure
NetBAY enclosures are stackable and each can store a different device, such as the
EXP300 expansion unit. You also can attach a server to the top of the enclosure. Refer
to the NetBAY documentation for details on installing other devices.
Note:
Because of the depth of the NetBAY3E enclosure, it might be difficult to set
the expansion unit option switches once installed. Verify that internal option
switches 1 and 2 are set to Off, and that internal option switch 3 and the unit
ID switch are set properly for your environment. See “Setting the interface
options and ID settings” on page 11 for more information.
To install the expansion unit in the enclosure, use the following procedure:
1. Remove the rear plate of the enclosure
1
.
2. Use the following illustration of the front and rear rack-mounting flanges to
determine the appropriate enclosure mounting holes for installing cage nuts to
secure your device and rails. From left to right, the illustration shows the front
and rear flanges respectively.
Summary of Contents for Netfinity EXP300
