18
IBM® Netfinity® EXP300 Installation and User’s Guide
3. On the rail marked L, loosen the four screws
3
.
4. Hold the rail against the outside of the left enclosure-mounting flange, and
loosely insert the two M6 screws
4
.
5. Extend the rail outside of the rear enclosure mounting flange; then, install and
tighten the two rear M6 screws
5
.
6. Tighten the two front screws
4
; then, tighten the four screws
3
.
Repeat step 3 through step 5 to install the rail marked R on the right side of the
enclosure.
7. Loosely insert an M5 screw
2
into each rail.
8. Slide the expansion unit into the enclosure.
9. Insert two M6 screws
6
. Do not over tighten the M6
6
screws.
10. Tighten the rear screws
2
.
11. Install hard disk drives and power supplies in the EXP300 expansion unit
according to “Chapter 3. Installing and replacing devices,” on page 25; then,
continue with “Completing the installation” on page 19.
Statement 4
≥
18 kg (37 lbs)
≥
32 kg (70.5 lbs)
≥
55 kg (121.2 lbs)
CAUTION:
Use safe practices when lifting.
Front
Rear
Summary of Contents for Netfinity EXP300
