IBM IntelliStation M Pro 6233, Hardware Maintenance Manual

Page: 85 / 156

Fan removal
Note: The illustrations in this documents might differ slightly from your hardware.
Note: Before performing any removals, read “Safety information” on page 103 and “Before
you begin” on page 43.
To remove the fan, do the following:
1. Power-off the system.
2. Unplug the system.
3. Remove the cover (see “Removing the cover and front bezel” on page 47).
4. Disconnect the fan from the system board.
5. Remove the full length PCI cards.
6. Remove the air duct by pushing the blue push pins (2) outward.
7. Pull the (2) blue push pins on the top corners of the assembly.
8. Lean fan bracket assembly towards rear of the computer and pull out.
FRU information (service only)
75