IBM IntelliStation M Pro 6233, Hardware Maintenance Manual

Page: 75 / 156

Replacing the cover and connecting the cables
This section provides instructions on how to replace the cover and connect the
cables on the computer.
Note: The illustrations in this document might differ slightly from the hardware.
Complete the following steps to replace the cover and connect the cables:
1. Review the “Safety information” on page 103.
2. Ensure that all components have been reassembled correctly, and that no tools
or loose screws are left inside the computer.
3. Clear any cables that might impede the replacement of the cover.
4. Place the front bezel back onto the front of the chassis and snap it into place.
5. Slide the side cover into place on the chassis and lock the key-lock button.
6. Reconnect the external cables and power cords to the computer; then, plug the
power cords into properly grounded electrical outlets. Turn on the attached
devices and the computer.
7. Update the computer configuration. See “Updating the computer configuration”
on page 71.
Note: If an error message related to the chassis-intrusion detector appears after
you restart the computer, you must type the administrator password. For
more information, see “Using passwords” on page 36.
Installing options
65