IBM IntelliStation M Pro 6233, Hardware Maintenance Manual

Page: 12 / 156

002
If the Power Management feature is enabled, do the following:
1. Start the Configuration/Setup Utility program (see “Setup Utility program” on
page 17.)
2. Select Power Management from the Configuration/Setup Utility program menu.
3. Select APM .
4. Be sure APM BIOS Mode is set to Disabled . If it is not, press Left Arrow (“) or
Right Arrow (”) to change the setting.
5. Select Automatic Hardware Power Management .
6. Set Automatic Hardware Power Management to Disabled .
7. If the problem persists, continue to
003
.
003
Run the Diagnostic programs. If necessary, refer to “Running diagnostics tests” on
page 19.
v
If you receive an error, replace the part that the diagnostic program calls out or
go to “Diagnostics” on page 18.
v If the test stops and you cannot continue, replace the last device tested.
2
Hardware Maintenance Manual: IBM IntelliStation M Pro Type 6233 and 6850