IBM IntelliStation M Pro 6220, User Manual

Page: 69 / 166

remove the DIMM, then reinsert it.
DIMM
connector 1
DIMM
connector 2
DIMM
connector 3
DIMM
connector 4
11. If you have other options to install or remove, do so now. Otherwise, rotate the
drive cage back into the computer and replace the support bracket (see
“Removing and installing the support bracket” on page 33).
12. Replace the cover (see “Replacing the cover” on page 48).
13. Reconnect the external cables and power cords. Turn on the attached devices,
and turn on the computer.
Installing a security rope clip
To help prevent hardware theft, you can add a security rope clip and cable to your
computer. After you add the security cable, make sure that it does not interfere with
other cables that are connected to the computer.
Before you begin, obtain the following items:
v
A flat-blade screwdriver
v An adjustable wrench
v
A 19 mm (0.75 in.) rope clip or wire rope (similar to National Manufacturing
number 3230, stock number 176-735)
v
Threaded nuts that fit the rope clip
v A security cable
v
A lock, such as a combination lock or padlock
Complete the following steps to install a rope clip:
1. Turn off the computer and all attached devices. Disconnect all external cables
and power cords; then, remove the cover. See “Removing the cover” on page
33.
2. Use a screwdriver to remove the two metal knockouts.
3. Insert the rope clip through the rear panel; then, attach and tighten the nuts.
Chapter 4. Installing options
47