IBM InfoPrint 6500, Quick Start Manual

Page: 42 / 88

13.
Raise the platen lever all the way.
14. Turn the vertical position knob to feed the paper up into the paper guide
assembly.
15. Turn the platen stop knob clockwise or counterclockwise to match the
paper thickness. (The A-B-C scale corresponds approximately to 1-, 3-,
and 6-part paper thickness).
Note: The platen stop allows you to set an optimum and consistent
thickness that is not affected when opening and closing the platen
lever.
16. Lower the platen lever until it stops.
17.
If necessary, press STOP to remove the “LOAD PAPER” fault message
from the display.
C2QQ2015
Platen Lever
Platen Stop
Platen Stop Knob
Paper Thickness
Indicator
Vertical Position
Knob
A
A
Figure 30. Set the Platen Lever Based on the Paper Thickness
Load the Paper (Standard Configuration)
32
Infoprint 6500 Quick Start Guide
|
|
|
|
|
|
|
|
|
|