IBM InfoPrint 6500, Quick Start Manual

Page: 21 / 88

Remove Tags - Cabinet Model
Note: If you have the pedestal model, go to “Remove Tags - Pedestal Models”
on page 15.
If you have the power paper stacker installed, skip this procedure and
go to “Remove the Shipping Restraints from the Power Paper Stacker
(if Equipped)” on page 12.
1. Remove the tie wrap attached to the passive stacker paper fence. The tie
wrap is marked with a large, red tag.
2. Close the cabinet rear door.
Passive Stacker
Paper Fence
(If equipped)
Red Tag
C2QU2015
Tie Wrap
Figure 10. Interior View Showing Tag Removal from the Cabinet Models
Remove Tags - Cabinet Model
Basic Operating Procedures
11
|
|
|
|