IBM InfoPrint 1634, User Manual

Page: 71 / 106

Ordering supplies and other maintenance items
Ordering toner cartridges
When a toner low message such as
88 Cyan Toner Low
appears, or when print becomes faded, first try to extend the
life of the specified cartridge:
1
Remove the specified toner cartridge.
2
Rotate the toner cartridge as shown, and firmly shake the cartridge up and down several times to redistribute the toner
toward the front of the toner cartridge.
You may be able to print a limited number of pages when the message first appears, but it is best to have the new
cartridge available when the current one runs out.
3
Reinsert the toner cartridge to continue printing.
4
Repeat this procedure multiple times until printed text and graphics remain faded.
Note: Several hundred pages may be printed after one of the messages first appears.
Once the printed text and graphics remain faded, replace the specified toner cartridge.
For information about the print cartridges available for the printer, contact the place where you purchased the printer.
Ordering supplies
To order photoconductors, transfer belts, or fusers, contact the place where you purchased the printer.
Moving the printer
Before moving the printer
CAUTION: The printer weighs 25.40 kg (56 lb); therefore, it requires at least two people to lift it safely. Use the
handholds on the sides of the printer to lift it, and make sure your fingers are not under the printer when you set it
down.
Follow these guidelines to avoid personal injury or printer damage:
•
Always use at least two people to lift the printer.
•
Always turn off the printer using the power switch before moving it.
•
Disconnect all cords and cables from the printer before moving it.
•
Remove all printer options before moving the printer.
Warning: Damage to the printer caused by improper moving is not covered by the printer warranty.
71