IBM H SERIES RS/6000, Installation And Service Manual

Page: 154 / 424

Table 3-7 (Page 2 of 3). Model H70 Service Processor Checkpoints
Checkpoint Description Action/
Possible Failing FRU
E044 Preparing to set serial port line
speed 1. I/O board. (See notes on 3-1.)
2. CPU Card.
E045 Preparing to initialize serial port 1. I/O board. (See notes on 3-1.)
2. CPU Card.
E060 Preparing to auto power-on (AC
restored) 1. I/O board. (See notes on 3-1.)
2. CPU Card.
E061 Preparing to auto power-on (Timer) 1. I/O board. (See notes on 3-1.)
2. CPU Card.
E070 Configuring modem 1. Modem.
2. I/O board. (See notes on 3-1.)
3. CPU Card.
E072 Preparing to call home 1. Modem.
2. I/O board. (See notes on 3-1.)
3. CPU Card.
E075 Entering SP menus 1. I/O board. (See notes on 3-1.)
2. CPU Card.
E076 Leaving SP menus; attempting to
disconnect modems 1. I/O board. (See notes on 3-1.)
2. CPU Card.
E0A0 Beginning Bring-Up Phase 1. I/O board. (See notes on 3-1.)
2. CPU Card.
E0B0 Starting CPU BIST 1. CPU Card.
2. I/O board. (See notes on 3-1.)
E0C0 Starting X5 BIST 1. CPU Card.
2. I/O board. (See notes on 3-1.)
E0E0 Pulling CPU out of reset 1. CPU Card.
2. I/O board. (See notes on 3-1.)
E0E1 Pull CPU out of reset: okay 1. Remove processor card in slot
2 (if installed) and see if the
problem is resolved. If problem
is resolved replace processor
card. If not continue.
2. Exchange processor card in slot
1 with the processor card
removed in step 1 (or
replaceprocessor card if only
one processor card exists) and
see if problem is resolved. If
problem is resolved replace
processor card. If not continue.
3. System board.
4. I/O board. (See notes on 3-1.)
3-48
RS/6000 Enterprise Server Model H Series Installation and Service Guide