IBM H SERIES RS/6000, Installation And Service Manual

Page: 101 / 424

Step 2010-2
One of the following conditions exists. Take the action described.
1. You have an hdisk that has no associated pdisk.
a. Issue the system cfgmgr command.
b. Retry the Configuration Verification Service Aid.
c. If the problem remains, a software error has probably occurred. Call your
support center for assistance.
2. You have a pdisk that has no associated hdisk.
a. Run diagnostics (using system verification mode) to the pdisk.
b. If you get a five digit SRN, go to Table 5-1 on page 5-3 and follow the
actions described.
If you do not get a five digit SRN, the disk formatting may be incompatible
with the system (the disk was formatted on a different type of using system).
1. Format the pdisk.
2. Issue the system cfgmgr command.
3. Retry the Configuration Verification Service Aid.
3. If the problem remains, a software error has probably occurred. Call your
support center for assistance.
Chapter 2. Maintenance Analysis Procedures
2-67