IBM FlashSystem 900 Installation And Maintenance Manual Download Page 246

Page: 246 / 390

Installing Options

8. Connect the cable provided with the B/M on the adapter connector

according to the worksheet or ask the customer.

9. Then, tighten the cable screws (if present).

10. Label the cables for proper reconnection.

Configuring the Adapter.

1. In the Main Menu click on Network Node Processor (NNP) Management

option.

2. In the Network Node Processor (NNP) Management window, double click

on the Controller Configuration and Management (CCM) option.

3. The following window is displayed.

4. Click on File in the title bar, then select Open The Configuration List

window is displayed.

6-10

3746-9X0: MAE Installation and Maintenance

Summary of Contents for FlashSystem 900







































































































































































































































































































































































































Search results

Summary of Contents for FlashSystem 900

Reviews:

Related manuals for FlashSystem 900

Brands by name

Popular brands

IBM FlashSystem 900, Installation And Maintenance Manual

Search results

Summary of Contents for FlashSystem 900

Reviews:

Related manuals for FlashSystem 900

Brands by name

Popular brands