IBM FlashSystem 900, Installation And Maintenance Manual

Page: 40 / 390

Step 3.2 - Connecting the MAE to a 6275
Network Node Processor A/B
To TIC3
3746-9X0
To TIC3
3746-9X0
To SIE Card
3746-9X0
To TIC3
of CBSP
3746-9X0
1
2
4
3
8
5
7
7
Multiaccess Enclosure
PS2
PS1
Service Processor
Service Ring SPAU
8228
8228
8228
10
S
A
C
Figure 1-14. Cabling the Multiaccess Enclosure to a 6275
Connect the MAE to the service processor as follows:
1. Plug one adapter
.2/
(PN 73G8314) into any free location of the service
processor access unit (8228, service ring SPAU).
2. Connect cable
.4/
(PN 782960) on top of the PCMCIA card, then plug the
PCMCIA card into the system card (into any of the two slots) and the other
end of the cable to the plug of the 8228 where you installed connector
.2/
in the previous step.
3. Connect cable
.3/
(PN 782958) from the connector EIA-232 of the system
card to the COM 2 connector (upper slot) of the service processor.
Go to “Step 3.3 - Other MAE Cables Installation” on page 1-13
1-12
3746-9X0: MAE Installation and Maintenance