IBM FlashSystem 900 Installation And Maintenance Manual Download Page 169

Page: 169 / 390

Exchanging the Backplane

This procedure requires two people.

Switch OFF each power supply.

Unplug the power cord from the power receptacle.

Label the cables with the adapters and ports they plug into. Unplug all the
cables.

The unit is too heavy fully populated.

Remove the:

Power supplies (Loosen the screws on each component and pull the
handle)

System card (see “Exchanging the System Card” on page 4-5)

SAC (see “Exchanging the SAC” on page 4-24)

Adapters (see “Exchanging an Adapter” on page 4-42)

Fan tray (see “Exchanging the Fan Tray” on page 4-40).

At the rear of the rack remove the screws

.2/

which maintain the multiaccess

enclosure.

Chapter 4. Multiaccess Enclosure FRU Exchange

4-51

Summary of Contents for FlashSystem 900







































































































































































































































































































































































































Search results

Summary of Contents for FlashSystem 900

Reviews:

Related manuals for FlashSystem 900

Brands by name

Popular brands

IBM FlashSystem 900, Installation And Maintenance Manual

Search results

Summary of Contents for FlashSystem 900

Reviews:

Related manuals for FlashSystem 900

Brands by name

Popular brands