IBM eserver xSeries 350, User Reference Manual

Page: 153 / 174

Chapter 7. Rack installation instructions
141
Press in on the safety latch and slide the
server into the rack until the release latches
snap shut. Then, insert the M6 screws
through the release-latch-bracket assembly.
Inserting the M6 screws is optional,
unless you are moving the rack or the rack is
in a vibration-prone area.
Note:
A
A
B
B
B
11
A
12
If you need to access the rear of the server to
complete the installation, rotate the lever to
the vertical position and pull the arm away
from the server. Otherwise, the lever must be
in the horizontal position inside the rack to
prevent the cables from touching the rear
door of the rack.
A
C
C
Refer to your server documentation to complete the installation.