IBM eServer xSeries 135, User Reference Manual

Page: 57 / 144

Chapter 5. Installing options
45
7. Remove the clear shield that covers the inside of the server.
Note: It is not necessary to remove the shield when you are installing memory
modules or installing an adapter in a PCI slot.
Working with adapters
Your server comes with two peripheral component interconnect (PCI) adapter slots on
the system board with riser cards installed in them.
Attention: Your server also comes with an integrated video controller on the system
board. When you install a video adapter in a PCI slot, the server BIOS automatically
disables the integrated video controller. This enables the video adapter in the PCI slot
to control the video functions for your monitor.
The following illustration shows the location of the 33 MHz PCI expansion slots on
the system board.
Note: The illustrations in this document might differ slightly from your hardware.
PCI slot 1
64 bit
33 MHz (J10)
PCI slot 2
64 bit
33 MHz (J23)