IBM Enterprise Storage Server 2105 E10, Introduction And Planning Manual

Page: 32 / 156

Copy Services panels:
Use the ESS Web Copy Services panels to view and
define:
v
Volumes
The volumes panel allows you to view volumes and define them as source or
target volumes for PPRC or FlashCopy.
v
Storage Server
The Storage Server panel allows you to work with logical servers as complete
entities. You can build tasks to place all the volumes of a logical server within a
peer-to-peer relationship with all the volumes of another logical server.
You can also build a task to remove similar groups of volumes from an existing
peer-to-peer relationship.
You can determine the function of Consistency Groups and freeze and create
commands.
v
Paths
The Paths panel displays the current status of paths between an ESS and the
other ESSs or switches to which it is connected. The paths panel also shows
ESCON connected hosts and channel extenders.
You can use the paths panel to add or remove copy services paths or to create
consistency group relationships for the LSS pairs.
v
Tasks
The Tasks panel allows you to manage tasks you have defined. You can run,
remove, save, group, or ungroup tasks. The host system command line interface
function uses these predefined tasks.
v
Configuration
The Configuration panel allows the customer to view the copy services event and
timing logs, set password protection, refresh the panels and mail logs to a
specified userid.
SC
SI
/ F
CP
SC
SI
/F
CP
SCS
I / F
CP
ESCON
Site 1 Primary Site
ESS 1
HUB HUB
ESS 4
Site 2 Recovery Site
Backup
ESSnet
ESSnet
Server Group 1
Primary
H
O
S
T
SC
SI
/FC
P
CLI
CLI
ESCON
Server Group 2
ESS 2
Backup
ESS 5
Primary
H
O
S
T
CS000005
Figure 3. Connecting to ESS Web Copy Services server groups
8
ESS Introduction and Planning