IBM Enterprise Server S80, User Manual

Page: 61 / 282

Cleaning the CD-ROM Drive
This CD-ROM drive has an internal head-cleaning mechanism, and therefore does not
require an external cleaning device. The internal cleaning mechanism cleans the head
every time the tray is operated.
Always handle discs carefully by the edges to avoid leaving fingerprints or scratching
the disc. (This helps the disc to maintain good readability.) Discs can be wiped with a
soft, lint-free cloth or lens tissue. Always wipe in a straight line from the inner hub to the
outer rim.
Emergency Eject
Note: Execute the following procedure only in an emergency. For example, the caddy
does not eject when pressing the unload button.
1. Insert a small diameter rod, such as a straightened paper clip, into the emergency
eject hole. (Refer to the illustration below for the location of the emergency eject
hole.)
2. Push in the tool until you feel some resistance.
3. Maintain a small amount of pressure on the rod while pulling on the tray with your
fingernail.
4. Pull the tray open and remove the disc.
Note: Normally the tray makes a ratcheting sound when you pull it open using the
above procedure.
Tray Opening
Emergency
Eject Access
Load/Unload
Button
Status Light Volume Control
Head Phone
Jack
Chapter 2. Using the System
43